Closed
Bug 41784
Opened 24 years ago
Closed 24 years ago
install crash async
Categories
(SeaMonkey :: Installer, defect, P3)
Tracking
(Not tracked)
M17
People
(Reporter: Crimson2, Assigned: samir_bugzilla)
Details
(Keywords: crash)
From Bugzilla Helper: User-Agent: Mozilla/4.73 [en] (X11; U; Linux 2.2.15 i586) BuildID: 060620 When using ./mozilla-installer it crash's during installation. sometimes when using --sync i get an async error and it seems to freeze the program and not segfault. Reproducible: Always Steps to Reproduce: 1. run ./mozilla-installer 2. type run --sync 3. Select typical installation 4. click OK Actual Results: When it says Installing Mail & News... It says Processing file 164 of 164 and crash's. ./libzlib.so: No such file or directory. nNCL: registering deferred (0) Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 1026 (runnable)] 0x80ee9c0 in ?? () (gdb) bt #0 0x80ee9c0 in ?? () #1 0x4044c453 in ?? () #2 0x4045bdc0 in ?? () #3 0x40261f5f in __pthread_destroy_specifics () at specific.c:145 #4 0x4025eda3 in pthread_exit (retval=0x0) at join.c:36 #5 0x805352b in nsInstallDlg::WorkDammitWork () #6 0x4025f5d7 in pthread_start_thread (arg=0xbf7ffe40) at manager.c:241 #7 0x4025f614 in pthread_start_thread_event (arg=0xbf7ffe40) at manager.c:264 Expected Results: Installed mozilla and not crash? :) I did notice I dont have the following librarys reported as not being found by gdb: ./libplds4.so: No such file or directory. ./libplc4.so: No such file or directory. ./libnspr4.so: No such file or directory. ./libxpcom.so: No such file or directory. ./libjsdom.so: No such file or directory. ./libzlib.so: No such file or directory. I have zlib 1.1.3 as a shared library but compiled as /usr/local/lib/libz.so.1.1.3 I get the same stack trace if i do custom for any of the programs.
Assignee | ||
Comment 2•24 years ago
|
||
Remote display or are you on the host terminal? What build? Also, please see bug 36781 to determine if this is a dup. Thanks.
Status: UNCONFIRMED → NEW
Ever confirmed: true
Assignee | ||
Comment 3•24 years ago
|
||
And BTW, if you look at the mozilla-installer shell script, it already runs ./mozilla-installer-bin --sync.
Reporter | ||
Comment 4•24 years ago
|
||
It's similiar as 36781 with the async problem, however I dont have remote displays, I run X on the same machine as the display. As for bug 36781, I dont "Get these "cannot unlink" and "cannot remove directory" msgs (for .tmp directories)." I modified the script so i can run gdb as well, exec gdb ./mozilla-installer, and then i type run --sync which is the correct syntax for running mozilla-installer-bin --sync. It reproduces same error with or without gdb and with or without the script modificationk, the same problem still occurs.I went ahead and did a diff test like in bug 36781 cx543622-a:~/moz2$ diff package /usr/local/mozilla Only in package: TestGtkEmbed Only in package: bloaturls.txt Common subdirectories: package/chrome and /usr/local/mozilla/chrome Binary files package/component.reg and /usr/local/mozilla/component.reg differ Common subdirectories: package/components and /usr/local/mozilla/components Common subdirectories: package/defaults and /usr/local/mozilla/defaults Common subdirectories: package/icons and /usr/local/mozilla/icons Only in package: libgtkembedmoz.so Only in package: mozilla-config Only in package: mozilla-installer-bin Only in package: nsTestSample Common subdirectories: package/plugins and /usr/local/mozilla/plugins Common subdirectories: package/res and /usr/local/mozilla/res Common subdirectories: package/searchplugins and /usr/local/mozilla/searchplugins Only in package: timebombgen Only in package: vreg Only in package: xpidl Only in package: xpt_dump Only in package: xpt_link It doesn't exactly look like bug 36781, but a few similiarties. I tested it witht todays build 2000060708
Assignee | ||
Comment 5•24 years ago
|
||
RH 6.2 stock installation, I take it? Hardware specs? Grace, Can you reproduce this on a RedHat 6.2 Linux configuration?
Target Milestone: --- → M17
Reporter | ||
Comment 6•24 years ago
|
||
System Config ----------------- XFree86 Version 4.0 / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 8 March 2000 Device "Creative Graphics Blaster TNT2" Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz NV: driver for NVIDIA chipsets: RIVA128, RIVATNT, RIVATNT2, RIVATNT2 (Ultra), RIVATNT2 (Vanta), RIVATNT2 M64, RIVATNT2 (Integrated), GeForce 256, GeForce DDR, Quadro NVIDIA_GLX.0.9 Window Maker 0.62.1 64MB ram, k6-2 300mhz, Linux 2.2.15, Slackware 7 Not default stock Slack, current binaries have been updated gcc 2.95.2 GLIBC 2.1.3 Additional librarys: audiofile-0.1.9 bzip2-1.0.0 giflib-4.1.0 glib-1.2.8 gtk+-1.2.8 imlib-1.9.8.1 jpeg-6b lesstif-0.91.0 libPropList-0.10.1 libpng-1.0.6 libsigc++-0.8.5 libuta-0.3.24 libxml-1.8.7 tiff-v3.4 xpm-3.4k zlib-1.1.3 dmesg output: Linux version 2.2.15 (root@cx543622-a) (gcc version 2.95.2 19991024 (release)) # 4 Fri Jun 2 14:58:10 PDT 2000 Detected 300687939 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 599.65 BogoMIPS Memory: 63112k/65536k available (1096k kernel code, 416k reserved, 868k data, 44 k init) Dentry hash table entries: 8192 (order 4, 64k) Buffer cache hash table entries: 65536 (order 6, 256k) Page cache hash table entries: 16384 (order 4, 64k) VFS: Diskquotas version dquot_6.4.0 initialized CPU: L1 I Cache: 32K L1 D Cache: 32K CPU: AMD AMD-K6(tm) 3D processor stepping 00 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX PCI: PCI BIOS revision 2.10 entry at 0xfb250 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: 00:38 [1106/0586]: Work around ISA DMA hangs (00) Activating ISA DMA hang workarounds. Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP TCP: Hash tables configured (ehash 65536 bhash 65536) Initializing RT netlink socket Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured apm: BIOS version 1.2 Flags 0x07 (Driver version 1.12) Real Time Clock Driver v1.09 Sound initialization started Sound initialization complete VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:pio, hdb:pio ide0: VIA Bus-Master (U)DMA Timing Config Success ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio ide1: VIA Bus-Master (U)DMA Timing Config Success hda: WDC AC36400L, ATA DISK drive hdc: ATAPI CD-ROM DRIVE 32X MAXIMUM, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: WDC AC36400L, 6149MB w/256kB Cache, CHS=784/255/63, UDMA hdc: ATAPI 27X CD-ROM drive, 120kB Cache Uniform CDROM driver Revision: 2.56 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 tulip.c:v0.91g-ppc 7/16/99 becker@cesdis.gsfc.nasa.gov eth0: Digital DC21041 Tulip rev 33 at 0xe800, 00:00:C5:47:A5:60, IRQ 10. eth0: 21041 Media table, default media 0800 (Autosense). eth0: 21041 media #0, 10baseT. eth0: 21041 media #4, 10baseT-FD. eth1: Lite-On 82c168 PNIC rev 32 at 0xec00, 00:A0:CC:58:34:B7, IRQ 9. eth1: MII transceiver #1 config 3000 status 7809 advertising 01e1. Partition check: hda: hda1 hda2 < hda5 > hda3 VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 44k freed Adding Swap: 128484k swap-space (priority -1) VFS: Disk change detected on device ide1(22,0) eth0: 21143 10baseT link beat good. ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996 Found OPL3-SAx (YMF719) <MS Sound System (CS4231)> at 0x534 irq 5 dma 0,3 <MPU-401 0.0 Midi interface #1> at 0x330 irq 5 dma 0,0 NVRM: **** Verifying we have an AGP graphics card NVRM: *** found AGP device at slot 0x0 NVRM: *** init AGP NVRM: *** init chipsets NVRM: *** unrecognized AGP chipset, not configuring if anyone is interested in seeing my XFree86.0.log file and/or XF86Config, Kernel Config File, or any /proc files, please email me since these files are quite lengthy :) I've tried changing video drivers, window managers, same error occurs. It appears to install the Navigator and Mail and news, however chatzilla never gets installed. It appears to run fine however I haven't done extensive testing other than running it, opening mail, and changing to www.yahoo.com.
Assignee | ||
Comment 7•24 years ago
|
||
Grace, Never mind what I said about testing on an RH 6.2 system. When you get a chance please reproduce this in our labs on a Slackware 7 system. Thanks.
Status: NEW → ASSIGNED
Assignee | ||
Comment 9•24 years ago
|
||
Matthew, I have been given to understand that it may be the case we don't QA the Slackware 7 platform. In addition, I am not equipped with sucha a configuration to debug. In order to resolvethis, I am open to patches for the bug. Let's see if Grace comes up with a Slackware 7 machine.
Comment 10•24 years ago
|
||
Not sure if I am seeing the same thing- on first attempt at install I get the following error. Xlib: unexpected async reply (sequence 0x3c90)! and install hangs. A second attempt is successful as in the past (coredump at finish)
Reporter | ||
Comment 11•24 years ago
|
||
I do recieve that same error, however it appears to happen randomly and not every time, however, I dont remember it ever happening without using --sync, but i could be mistaken.
Reporter | ||
Comment 12•24 years ago
|
||
Oh, on another note, does it infact install Chatzilla as well? I try mozilla -chat but the browser just comes up, and there's nothing chat related under tools..or anything resembling the word "chat" in the mozilla directory, find /usr/local/mozilla | grep "chat" or find /usr/local/mozilla | grep "Chat"
Comment 13•24 years ago
|
||
now that you mention it- I do not see it being installed and checked directories and it is not part of installed build...part of gunzipped build though sgehani, granrose-shouldn't chatzilla be part of this installed build?
Comment 14•24 years ago
|
||
dunno. if you do a custom install, it shows chatzilla as an option, but I've never tried to use it after installation. cc'ing leaf for his input.
Assignee | ||
Comment 15•24 years ago
|
||
Yes, chatzilla should be part of this install. Dan added it XP. CC'ing him.
Comment 16•24 years ago
|
||
color me blind! chatzilla available in custom install
Comment 17•24 years ago
|
||
Hmm, does that mean chatzilla is not part of the typical installation? I made it part of typical on the windows and mac mozilla builds, probably should be on Linux as well.
Comment 18•24 years ago
|
||
Linux currently has the 4 options, Typical (most common options, without Java), Complete (with Java), Navigator only, and Custom.
Assignee | ||
Comment 19•24 years ago
|
||
Two things: 1> The chatzilla/options discussion is way off topic. Let's leave that out of this bug. 2> The options in mozilla are all lies right now. I'll be fixing this to remain in line with the commercial options: typical and custom. While doing this I'll add chatzilla to typical.
Reporter | ||
Comment 20•24 years ago
|
||
This bug still seems to exist. I just did a clean install of Slackware 7.1 and the backtrace is still the same. #0 0x405217ef in ?? () #1 0x4042e453 in ?? () #2 0x4043ddc0 in ?? () #3 0x4025ef5f in __pthread_destroy_specifics () at specific.c:145 #4 0x4025bda3 in pthread_exit (retval=0x0) at join.c:36 #5 0x805352b in nsInstallDlg::WorkDammitWork () #6 0x4025c5d7 in pthread_start_thread (arg=0xbf7ffe40) at manager.c:241 #7 0x4025c614 in pthread_start_thread_event (arg=0xbf7ffe40) at manager.c:264 BuildID: 2000071211 It crashed on a Typical Install after installing file 54 of 54 of Chatzilla. What Glibc version are you guys using? I'm running Glibc 2.1.3, is it possible it's a pthread bug?
Status: ASSIGNED → NEW
Reporter | ||
Comment 21•24 years ago
|
||
Okay, I went ahead and compiled it on my Slack71 i'm running with Debug information and here's what I got and the same backtrace btw: progress percent: 0.977143 aVal: 171 aMax: 175 progress percent: 0.982857 aVal: 172 aMax: 175 progress percent: 0.988571 aVal: 173 aMax: 175 progress percent: 0.994286 aVal: 174 aMax: 175 progress percent: 1.000000 aVal: 175 aMax: 175 DEBUG: XPI_Install mail.xpi returned 0 nsXIEngine.cpp 428: XPI_Exit called nsXIEngine.cpp 51: ~nsXIEngine nsXIEngine.cpp 55: nsInstallDlg.cpp 331: pre pthread_exit ./mozilla-installer: line 48: 32730 Segmentation fault ./mozilla-installer-bin --sync Let me know if this helps any
Assignee | ||
Comment 22•24 years ago
|
||
Debugging the problem on Linux yielded exactly the same results. This looks like a dup of 36781. *** This bug has been marked as a duplicate of 36781 ***
Status: NEW → RESOLVED
Closed: 24 years ago
Resolution: --- → DUPLICATE
Reporter | ||
Comment 23•24 years ago
|
||
Please note that I'm not using a remote display or rlogin, I'm at the same machine X is running on.
Assignee | ||
Comment 24•24 years ago
|
||
Yes, bug 36781 has morphed into a problem that manifests on local displays too.
Updated•20 years ago
|
Product: Browser → Seamonkey
You need to log in
before you can comment on or make changes to this bug.
Description
•