Closed
Bug 486840
Opened 15 years ago
Closed 15 years ago
checksetup.pl runs ok, but Apache reports "Can't locate Date/Parse.pm in @INC (@INC contains: . lib /usr/perl5/5.8.4/lib/sun4-solaris-64int etc"
Categories
(Bugzilla :: Installation & Upgrading, defect)
Tracking
()
RESOLVED
INVALID
People
(Reporter: david.kirkby, Unassigned)
References
()
Details
User-Agent: Mozilla/5.0 (X11; U; SunOS sun4u; en-US; rv:1.8.1.14) Gecko/20080520 Firefox/2.0.0.14 Build Identifier: bugzilla-3.2.2 I've installed perl, v5.8.4 (built from source IIRC), installed my MySQL v5.1.32 (downloaded binary from mysql.com) and added most of the perl modules suggested. PerlMagick would not install as it suffers a a GNUism (uses Sun's compiler, but uses -Wall, which is a gcc specific flag). In any case, PerlMagick is not mandatory, so I skipped that. I've set up the database and run the test script. That appears to run ok - see output at the very end of the here. However, while Apache loads the cgi script, it reports a failure. ---------------------------------------------- Software error: Can't locate Date/Parse.pm in @INC (@INC contains: . lib /usr/perl5/5.8.4/lib/sun4-solaris-64int /usr/perl5/5.8.4/lib /usr/perl5/site_perl/5.8.4/sun4-solaris-64int /usr/perl5/site_perl/5.8.4 /usr/perl5/site_perl /usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int /usr/perl5/vendor_perl/5.8.4 /usr/perl5/vendor_perl) at Bugzilla/Util.pm line 51. BEGIN failed--compilation aborted at Bugzilla/Util.pm line 51. Compilation failed in require at Bugzilla/Error.pm line 33. BEGIN failed--compilation aborted at Bugzilla/Error.pm line 33. Compilation failed in require at Bugzilla/Auth.pm line 34. BEGIN failed--compilation aborted at Bugzilla/Auth.pm line 34. Compilation failed in require at Bugzilla.pm line 40. BEGIN failed--compilation aborted at Bugzilla.pm line 40. Compilation failed in require at /usr/local/apache2/htdocs/g8wrb/bugzilla-3.2.2/index.cgi line 34. BEGIN failed--compilation aborted at /usr/local/apache2/htdocs/g8wrb/bugzilla-3.2.2/index.cgi line 34. For help, please send mail to the webmaster (xxxx@yyy.com), giving this error message and the time and date of the error. ------------------------------------------------------- I assumed that Bugzilla needed the perl modules 'Date::Parse' but the checksetup.pl did not check for it. So I thought I would install that. # perl -MCPAN -e 'install Date::Parse' CPAN: Storable loaded ok Going to read /.cpan/Metadata Database was generated on Sat, 04 Apr 2009 08:27:39 GMT Date::Parse is up to date. As you can see, Date::Parse is installed, but 'enter_bug.cgi' cant find it. # ./checksetup.pl * This is Bugzilla 3.2.2 on perl 5.8.4 * Running on SunOS 5.10 Generic_120011-14 Checking perl modules... Checking for CGI.pm (v3.21) ok: found v3.42 Checking for TimeDate (v2.21) ok: found v2.22 Checking for PathTools (v0.84) ok: found v3.29 Checking for DBI (v1.41) ok: found v1.607 Checking for Template-Toolkit (v2.15) ok: found v2.20 Checking for Email-Send (v2.00) ok: found v2.194 Argument "1.99_01" isn't numeric in subroutine entry at /usr/perl5/site_perl/5.8.4/Email/MIME/Header.pm line 8. Checking for Email-MIME (v1.861) ok: found v1.863 Checking for Email-MIME-Modifier (v1.442) ok: found v1.443 Checking available perl DBD modules... Checking for DBD-Pg (v1.45) not found Checking for DBD-mysql (v4.00) ok: found v4.010 Checking for DBD-Oracle (v1.19) not found The following Perl modules are optional: Checking for GD (v1.20) ok: found v2.41 Checking for Chart (v1.0) ok: found v2.4.1 Checking for Template-GD (any) ok: found v1.56 Checking for GDTextUtil (any) ok: found v0.86 Checking for GDGraph (any) ok: found v1.44 Checking for XML-Twig (any) ok: found v3.32 Checking for MIME-tools (v5.406) ok: found v5.427 Checking for libwww-perl (any) ok: found v5.824 Checking for PatchReader (v0.9.4) ok: found v0.9.5 Checking for PerlMagick (any) not found Checking for perl-ldap (any) not found Checking for Authen-SASL (any) not found Checking for RadiusPerl (any) ok: found v0.13 Checking for SOAP-Lite (any) ok: found v0.710.08 Checking for HTML-Parser (v3.40) ok: found v3.60 Checking for HTML-Scrubber (any) ok: found v0.08 Checking for Email-MIME-Attachment-Stripper (any) ok: found v1.316 Checking for Email-Reply (any) ok: found v1.202 Checking for mod_perl (v1.999022) not found ********************************************************************** * OPTIONAL MODULES * ********************************************************************** * Certain Perl modules are not required by Bugzilla, but by * * installing the latest version you gain access to additional * * features. * * * * The optional modules you do not have installed are listed below, * * with the name of the feature they enable. If you want to install * * one of these modules, just run the appropriate command in the * * "COMMANDS TO INSTALL" section. * ********************************************************************** *********************************************************************** * MODULE NAME * ENABLES FEATURE(S) * *********************************************************************** * PerlMagick * Optionally Convert BMP Attachments to PNGs * * perl-ldap * LDAP Authentication * * Authen-SASL * SMTP Authentication * * mod_perl * mod_perl * *********************************************************************** COMMANDS TO INSTALL: PerlMagick: /usr/bin/perl install-module.pl Image::Magick perl-ldap: /usr/bin/perl install-module.pl Net::LDAP Authen-SASL: /usr/bin/perl install-module.pl Authen::SASL mod_perl: /usr/bin/perl install-module.pl mod_perl2 To attempt an automatic install of every required and optional module with one command, do: /usr/bin/perl install-module.pl --all Reading ./localconfig... OPTIONAL NOTE: If you want to be able to use the 'difference between two patches' feature of Bugzilla (which requires the PatchReader Perl module as well), you should install patchutils from: http://cyberelk.net/tim/patchutils/ Checking for DBD-mysql (v4.00) ok: found v4.010 Checking for MySQL (v4.1.2) ok: found v5.1.32-log Removing existing compiled templates... Precompiling templates...done. Fixing file permissions... Now that you have installed Bugzilla, you should visit the 'Parameters' page (linked in the footer of the Administrator account) to ensure it is set up as you wish - this includes setting the 'urlbase' option to the correct URL. Reproducible: Always Steps to Reproduce: 1. Install Bugzilla 2. Try to run it. I've pretty much described this above, so no need to elaborate. Actual Results: Software error: Can't locate Date/Parse.pm in @INC (@INC contains: . lib /usr/perl5/5.8.4/lib/sun4-solaris-64int /usr/perl5/5.8.4/lib /usr/perl5/site_perl/5.8.4/sun4-solaris-64int /usr/perl5/site_perl/5.8.4 /usr/perl5/site_perl /usr/perl5/vendor_perl/5.8.4/sun4-solaris-64int /usr/perl5/vendor_perl/5.8.4 /usr/perl5/vendor_perl) at Bugzilla/Util.pm line 51. BEGIN failed--compilation aborted at Bugzilla/Util.pm line 51. Compilation failed in require at Bugzilla/Error.pm line 33. BEGIN failed--compilation aborted at Bugzilla/Error.pm line 33. Compilation failed in require at Bugzilla/Auth.pm line 34. BEGIN failed--compilation aborted at Bugzilla/Auth.pm line 34. Compilation failed in require at Bugzilla.pm line 40. BEGIN failed--compilation aborted at Bugzilla.pm line 40. Compilation failed in require at /usr/local/apache2/htdocs/g8wrb/bugzilla-3.2.2/index.cgi line 34. BEGIN failed--compilation aborted at /usr/local/apache2/htdocs/g8wrb/bugzilla-3.2.2/index.cgi line 34. For help, please send mail to the webmaster (xxxx@yyy.com), giving this error message and the time and date of the error. Expected Results: I assume there would be some sort of admin page, of some sort, rather than a list of error messages. Hardware is a Sun Ultra 60, running Solaris 10 update 6. # uname -a SunOS main-webserver 5.10 Generic_120011-14 sun4u sparc SUNW,Ultra-60 # cat /etc/release Solaris 10 8/07 s10s_u4wos_12b SPARC Copyright 2007 Sun Microsystems, Inc. All Rights Reserved. Use is subject to license terms. Assembled 16 August 2007 # mysql -V mysql Ver 14.14 Distrib 5.1.32, for sun-solaris2.10 (sparc) using readline 5.1 # which perl /usr/bin/perl # perl -v This is perl, v5.8.4 built for sun4-solaris-64int
You may notice above a report from the check script about something not being numeric: Checking for Email-Send (v2.00) ok: found v2.194 Argument "1.99_01" isn't numeric in subroutine entry at /usr/perl5/site_perl/5.8.4/Email/MIME/Header.pm line 8. Checking for Email-MIME (v1.861) ok: found v1.863 Well, I don't know where it gets this from, but line 8 of /usr/perl5/site_perl/5.8.4/Email/MIME/Header.pm has this entry: use Encode 1.9801; 1.9801 looks pretty numeric to me, and it's hard to see a relationship between that and 1.99_01. (Check carefully, the numbers don't agree)
Comment 2•15 years ago
|
||
Looks like TimeDate isn't installed correctly. It's the Perl package which contains Date::Format, see http://search.cpan.org/~gbarr/TimeDate-1.16/lib/Date/Parse.pm
Status: UNCONFIRMED → RESOLVED
Closed: 15 years ago
Resolution: --- → INVALID
Well, the file Date/Parse.pm does exist in one of the directories indicated. According to the Bugzilla errror message, @INC includes /usr/perl5/site_perl/5.8.4 The file Date/Perse.pm *does* exist there. It appears to be the one you pointed me too, which is by Graham Barr, as the copyright at the top of the file shows his name too: # ls -l /usr/perl5/site_perl/5.8.4/Date/Parse.pm -r--r--r-- 1 root root 8859 Jun 3 2003 /usr/perl5/site_perl/5.8.4/Date/Parse.pm # head /usr/perl5/site_perl/5.8.4/Date/Parse.pm # Date::Parse $Id: //depot/TimeDate/lib/Date/Parse.pm#22 $ # # Copyright (c) 1995 Graham Barr. All rights reserved. This program is free # software; you can redistribute it and/or modify it under the same terms # as Perl itself. package Date::Parse; require 5.000; use strict;
Status: RESOLVED → UNCONFIRMED
Resolution: INVALID → ---
A small perl program I wrote, using time2str(), seems to work too. # cat test.pl #! /usr/bin/perl -w use Date::Format; print time2str("%Y-%m-%d %T", $^T )."\n"; # ./test.pl 2009-04-04 23:36:26
Comment 5•15 years ago
|
||
This is not actually a bug in Bugzilla, but simply a configuration problem. Support for Bugzilla can be gotten using the various resources listed here: http://www.bugzilla.org/support/
Status: UNCONFIRMED → RESOLVED
Closed: 15 years ago → 15 years ago
Resolution: --- → INVALID
I'll look at http://www.bugzilla.org/support/ Personally, I would have thought as there is a script (./checksetup.pl) which checks the setup, it should detect this.
It sounds like the problem I had this week for which I've suggested an additional paragraph in the documentation. https://bugzilla.mozilla.org/show_bug.cgi?id=510689
You need to log in
before you can comment on or make changes to this bug.
Description
•