Closed Bug 768137 Opened 12 years ago Closed 12 years ago

Crossconnect for phx1-na1a & phx1-na1b to core

Categories

(Infrastructure & Operations :: DCOps, task)

x86
macOS
task
Not set
normal

Tracking

(Not tracked)

RESOLVED FIXED

People

(Reporter: dparsons, Assigned: van)

Details

(Whiteboard: phx1)

Please connect the new phx1 NetApp, phx1-na1a & phx1-na1b to the core phx1 switch, using a pair of 10Gb connections for each controller. Details:

(1) The top NetApp controller is phx1-na1a, the bottom is phx1-na1b. (They're labeled this way on the front, but not on the back)

(2) On each controller, use ports e0c and e0e

(3) Ports should be set up as LACP, with the following VLANs tagged: 32 84 83 82 81 50 75 74 100 80

(4) Hopefully the far end of each pair can be connected to separate switches for redundancy?
Regarding (4):

Currently, the core in PHX1 is not aggregated the way it is in SCL3. The PHX1 core has two physically separate switches.

We can not create an LACP bundle across these two switches, so you have two options:

1) Each netapp has a connection to each core, but they are not LACP bonded.
2) netapp-a has a bonded pair of connections to core1, and netapp-b has a bonded pair of connections to core2
Whiteboard: scl3
Whiteboard: scl3 → phx1
Let's go with #1
Per our IRC conversation, this means setting up the netapp interfaces in active/passive "single mode".
Crossconnect order is in progress (Ticket 27689) and should be completed by 6/27.
The NetApp side of the configuration is done... when you connect these, if you want an IP to test, you can ping 10.8.75.77 and 10.8.75.78.
Crossconnect install has been completed.
phx1-na1[a,b] have been run to core[1,2].phx:2/0/[2,4].

i have updated inventory in the notes section for these links. 

van
Assignee: server-ops → vle
Status: NEW → RESOLVED
Closed: 12 years ago
Resolution: --- → FIXED
Product: mozilla.org → Infrastructure & Operations
You need to log in before you can comment on or make changes to this bug.