1220920 - XO cross connect for SJC2

Status: RESOLVED FIXED

(Infrastructure & Operations Graveyard :: NetOps: DC Carrier, task)

Description

[Van Le [:van]]

tracking bug:

FINAL A-side Demarc Point: SV1::01420:MOZILLA, 0107, PP:0107:138845, 23, 0

FINAL Z-side Demarc Point: SV1::01360:XO COMMUNICATIONS, 0000, CP:0000:74837, 9, 10

Carrier Circuit ID: SF/LZXX/150227/   /TQW /

Media Type: Single-Mode Fiber

Serial Number A-Side: 20059908

Serial Number Z-Side:

Comment 1

[Van Le [:van]]

cross connect patched but no light detected even after rolling fiber. emailed our XO rep to confirm they've configured their end.

[e-mail]> show interfaces diagnostics optics xe-1/2/5| grep dBm    
    Laser output power                        :  0.7190 mW / -1.43 dBm
    Receiver signal average optical power     :  0.0005 mW / -33.01 dBm
    Laser output power high alarm threshold   :  1.5840 mW / 2.00 dBm
    Laser output power low alarm threshold    :  0.1580 mW / -8.01 dBm
    Laser output power high warning threshold :  1.2580 mW / 1.00 dBm
    Laser output power low warning threshold  :  0.1990 mW / -7.01 dBm
    Laser rx power high alarm threshold       :  1.7783 mW / 2.50 dBm
    Laser rx power low alarm threshold        :  0.0100 mW / -20.00 dBm
    Laser rx power high warning threshold     :  1.5849 mW / 2.00 dBm
    Laser rx power low warning threshold      :  0.0158 mW / -18.01 dBm

Comment 2

[Van Le [:van]]

equinix fixed the light issue.

xe-1/2/5                up    up
xe-1/2/5.0              up    up   inet     216.156.84.30/30
                                   multiservice