**Created from INC0021521** The ethernet cable in the table at the front of the room nearest the display is not working
**Duplicate ticket INC0021604 was created** The netgear switch located at the front of the boardroom table is getting PoE but not sending out IP addresses to the three ethernet cables accessible through the cable cubbies. Switch likely needs to be reconfigured. Please let us know if we can help assist in any way.
:freshness, can you give me the switch port info or plug a device with a known mac address into the network port?
should be good now, also added description. access1.df701-1.ops.sfo1#show running-config interface gigabitEthernet 2/0/11 Building configuration... Current configuration : 171 bytes ! interface GigabitEthernet2/0/11 description boardroom-table switchport access vlan 224 switchport mode access switchport voice vlan 240 spanning-tree portfast end
Assignee: network-operations → vle
Freshness> 2:04 PM network works! 2:08 PM You can close the bug
Status: NEW → RESOLVED
Last Resolved: 2 years ago
Resolution: --- → FIXED
You need to log in before you can comment on or make changes to this bug.