1496234 - Please check switch configuration for Moonshot chassis 14

Status: RESOLVED FIXED

(Infrastructure & Operations Graveyard :: NetOps, task)

Description

[Mark Cornmesser [:markco]]

Particularly for cartridges 29 and 30. Just to see if there is anything different for these 2 in comparison to the rest of the chassis. They have been confirmed of being on the correct vlan, but I am wondering if there is something else going on here network wise. 

This two are not getting a response when we attempt to PXE boot.

Comment 1

[Van Le [:van]]

confirmed that only one interface is being used and on VLAN240.

XGE1/0/29            UP   10G(a)  F(a)   A    240
XGE1/0/30            UP   10G(a)  F(a)   A    240

2nd interface is admin down:

XGE2/0/29            ADM  auto    A      T    208
XGE2/0/30            ADM  auto    A      T    208

MAC addresses in infoblox matches NIC1 of spreadsheet:

f4:03:43:df:49:29 
f4:03:43:df:4f:c1

can you confirm that's the MAC address it's attempting to pxeboot off?

Comment 2

[Mark Cornmesser [:markco]]

That all looks good. Ty!

Comment 3

[Mark Cornmesser [:markco]]

Attachment: selfip.jpg

These look like they are not getting an IP address.

Comment 4

[Mark Cornmesser [:markco]]

I am going to gather more info on this tomorrow.

Comment 5

[Van Le [:van]]

it seems to be unable to connect to the dhcp server. have we tried asking QTS to reseat these blades?

Comment 6

[Van Le [:van]]

it looks like the switch doesn't see the MAC address of the cartridge:

on the bad examples above:
<moon14-access.rit46.inband.releng.mdc2.mozilla.net>display mac-address interfac
e Ten-GigabitEthernet 1/0/30 count
0 mac address(es) found.

on a working one:
<moon14-access.rit46.inband.releng.mdc2.mozilla.net>display mac-address interfac
e Ten-GigabitEthernet 1/0/28 count
1 mac address(es) found.