1530482 - [PDX1] please rack HP DL360 server in IDF

Status: RESOLVED FIXED

(Infrastructure & Operations :: DCOps, task)

Description

[Van Le [:van]]

we are adding a compute server to PDX1. can you please rack this server in the IDF and run 3 network links? please let me know rack and height so i can update the CMDB. please let me know if you have any questions.

iLO: any switch port
eth0: any switch port
eth1: any switch, not same as eth0

if possible can you have eth0 and eth1 on the same port number, ie, switch1:25 and switch2:25?

asset: 36072
server going out via: WPR0075044

:gcox, thank you for offering to help!

Comment 1

[Greg Cox [:gcox]]

Received:
Moz Asset 36072
Serial MXQ84204VG.
Default ILO DNS ILOMXQ84204VG

Racked in PDX, df302-1, U7. If you don't like me being in this rack, I'm happy to move but I then require guidance.

Cabled 2x power into the port 9's on both PDUs (nothing else was on that phase of the PDU's).

Cabled ether 1 port to access02-1 port 28
Cabled ether 2 port to access02-2 port 28
Cabled the iLO port to access02-3 port 28
All show link lights on switch side and host side.

I think this is ready for you to do switchy magic now.

Comment 2

[Van Le [:van]]

thanks again :gcox!

access02.df302-1.pri(config-if)#do show int status | i sccac
Gi1/0/28 sccache1 connected 272 a-full a-1000 10/100/1000BaseTX
Gi2/0/28 sccache1 connected 272 a-full a-1000 10/100/1000BaseTX
Gi3/0/28 sccache1-iLO connected 275 a-full a-1000 10/100/1000BaseTX