For now, and since it requires a full powerdown, I only want to upgrade RAM in momo-sunfire-03. I am not entirely sure the labelling on your end and my end is the same, so the machine might be mis-named. I can power it down and turn on the identification light on it, to be on the safe side. Phong, I need 15 minutes lead time to shutdown the VMs on it, and I can power it off. The installation should be straightforward. From the Sun documentation for these, here is how it should go. Currently, that system has 2 x 2Gb DIMMs in there, and they should be in slots A0 and B0, they will need to move out of the way. This guy is getting a 16Gb upgrade, for 20Gb total, that should be 4 new 4Gb DIMMs, for a total of 6. A0: 4Gb B0: 4Gb C0: 4Gb D0: 4Gb A1: 2Gb (old) B1: 2Gb (old) I'll attach Sun's diagram for this. I'll be on IRC, so you can find me there.
Indicator light should be blinking every 5 seconds now.
momo-sunfire-03 has 20 GB total.
Status: NEW → RESOLVED
Last Resolved: 9 years ago
Resolution: --- → FIXED
You need to log in before you can comment on or make changes to this bug.