956527 - Perf-o-Matic not showing data points for 2014

Status: RESOLVED WORKSFORME

(Datazilla Graveyard :: User interface, defect, P1)

Description

[Diego Marcos [:dmarcos]]

I cannot see data from 2014

https://datazilla.mozilla.org/b2g/?branch=master&device=hamachi&range=7&test=cold_load_time&app_list=camera,phone&app=camera&gaia_rev=5de94a2be6ab8d33&gecko_rev=c60683e1d032279b

Comment 1

[Dave Hunt [:davehunt] [he/him] ⌚BST]

It looks like two of the devices used to run these tests are unavailable. I've marked these nodes temporarily offline until they can be checked (they're in MV), and retriggered a job to run on an available node.

Comment 2

[Mike Lee [:mlee]]

(In reply to Dave Hunt (:davehunt) from comment #1)
> It looks like two of the devices used to run these tests are unavailable.
> I've marked these nodes temporarily offline until they can be checked
> (they're in MV), and retriggered a job to run on an available node.


Stephen, can you have someone take a look at these devices?

Comment 3

[Diego Marcos [:dmarcos]]

It's weird. Now I can only see data for 1/6/2014 and it shows up multiple times when selecting the last 7 days.

Comment 4

[Stephen Donner [:stephend] Not actively reading bugmail]

(In reply to Mike Lee [:mlee] from comment #2)
> (In reply to Dave Hunt (:davehunt) from comment #1)
> > It looks like two of the devices used to run these tests are unavailable.
> > I've marked these nodes temporarily offline until they can be checked
> > (they're in MV), and retriggered a job to run on an available node.
> 
> 
> Stephen, can you have someone take a look at these devices?

The culprits were B2G-0 and B2G-3, and are now fixed.  The "fix" was to remove the battery temporarily, boot up, attempt a restart, and re-seat the battery.

http://qa-selenium.mv.mozilla.com:8080/computer/b2g-0/
http://qa-selenium.mv.mozilla.com:8080/computer/b2g-3/

Comment 5

[Dave Hunt [:davehunt] [he/him] ⌚BST]

(In reply to Diego Marcos from comment #3)
> It's weird. Now I can only see data for 1/6/2014 and it shows up multiple
> times when selecting the last 7 days.

That would be expected. It ran several times yesterday (and now today) but was unable to run any other time in the last 7 days.

Comment 6

[Jonathan Griffin (:jgriffin)]

Looks like this was an issue with the hardware running the tests, which is now resolved.