Closed Bug 993549 Opened 6 years ago Closed 2 years ago
[B2G][Tarako][Settings][Powersave] Power Save Mode becomes disabled when the current battery level percentage increases during charging
Description: Power Save mode is used to reduce power consumption by turning off several power-hungry features. The mode can be toggled on manually by the user; however if the phone is plugged in (and charging) then the mode will automatically toggle OFF once the battery level has increased by 1% from its current level. The user might want to leave power mode enabled during charging to keep power consumption low thus reducing the overall charge time to charge the battery. Repro Steps: 1) Update a Tarako to BuildID: 20140407060052 2) Plug in device so it is charging (must be partially empty battery) 3) Toggle power save mode on 4) Wait until the current battery level % increases Actual: Power Save mode is automatically disabled Expected: Power Save mode will remain toggled ON to reflect user's preferences and allow them to easily leave high-energy consumption features disabled during charging. 1.3T Environmental Variables: Device: Tarako 1.3T MOZ BuildID: 20140407060052 Gaia: fbf194db193f12b0db070c87bc99f6bb42e28dc0 Gecko: Version: 28.1 Firmware Version: SB8810 Repro frequency: 100% See attached: logcat.txt Notes: This also occurs on the 1.3 Buri - 1.3 Environmental Variables: Device: Buri 1.3 MOZ BuildID: 20140402164004 Gaia: c5cd3a11e91339163b351d50769eaca0067da860 Gecko: c6c7b01cdb8e Version: 28.0 Firmware Version: V1.2-device.cfg
Firefox OS is not being worked on
Status: NEW → RESOLVED
Closed: 2 years ago
Resolution: --- → WONTFIX
You need to log in before you can comment on or make changes to this bug.